BABEL is a “big data” analysis tool for best practices developed by Moroccan Customs for use by the customs community, on the basis of information contained in the review WCO News and the “News” section of the WCO website.
The benchmarks result from the textual analysis of all the issues available in structured digital format, from issue 77 of June 2015 to issue 100 of February 2023.
Also integrated are the news published since 2009.
Dubai Customs gets underwater drone technology to enhance inspection
February 2022
Dubai Customs introduces blockchain-based platform to facilitate cross-border e-commerce
February 2020
Dubai Customs uses artificial intelligence to boost productivity
October 2019
Dubai Customs introduces a Virtual Reality Customs training programme
February 2019
Dubai Customs launches iDeclare
October 2018
Abu Dhabi launches application for real-time measurement of the time required to release goods
February 2023
Maqta Gateway: Digitizing and transforming trade
October 2020
The invisible and secure border of the future
June 2020
Dubai Customs: Journey towards a ‘Customs of the future’
June 2016
Building technology-driven organizations: China Customs shares its experience
October 2018
Key points from the 2022 WCO IT Conference and Exhibition
February 2023
The WCO Data Model: guidance for efficient implementation
October 2022
The AI revolution is underway, and this is good news for Customs
October 2022
Automatic detection tools help with identifying the illicit trade in ivory
June 2022
High-performance analytical tools to revolutionize Customs control
June 2022
Protecting importers’ information while improving Customs controls
June 2022
What impact is technology having on efforts to improve HS classification efficiency and accuracy?
February 2022
Expansion of rail freight transportation must go hand in hand with deployment of rail scanner systems
February 2022
Handling obsolete NII equipment
October 2021
The challenges of X-ray image analysis and the value of training
October 2021
Digitization of ATA Carnets: overview of the ICC pilot project
February 2021
The invisible and secure border of the future
June 2020
How Machine Learning Can Automate the Determination of the Valuation of Goods
February 2020
Key points from the WCO’s newly-launched technology event
October 2019
Going beyond the national Single Window
October 2018
Round-up of the 2017 WCO Technology & Innovation Forum
February 2018
Automatic detection tools: from concept to reality
June 2016
Round-up of the WCO Technology & Innovation Forum
February 2016
Key points from the 2022 WCO IT Conference and Exhibition
February 2023
TradeTrust: accelerating the digitalization of international trade
February 2021
Blockchain: unveiling its potential for Customs and trade
October 2018
Blockchain: mapping new trade routes to trust
October 2018
TradeLens uses blockchain to help Customs authorities facilitate trade and increase compliance
October 2018
Going beyond the national Single Window
October 2018
Emerging technologies can transform border management, but agencies must prepare
February 2017
Korea pilots blockchain technology as it prepares for the future
February 2019
UNI-PASS: Korea’s Customs modernization tool
February 2016
KCS takes its first steps into R&D
June 2022
BACUDA: supporting Customs with data analytics
February 2020
How Machine Learning Can Automate the Determination of the Valuation of Goods
February 2020
Malaysia Customs conducts online Factory Acceptance Test
February 2021
Malaysia launches new information system
February 2016
How Machine Learning Can Automate the Determination of the Valuation of Goods
February 2020
Biometric breakthrough: CBP’s innovative approach to keeping America safe
June 2019
Effective enforcement of international trade regulations requires powerful data analytics
February 2023
Key points from the 2022 WCO IT Conference and Exhibition
February 2023
The AI revolution is underway, and this is good news for Customs
October 2022
KCS takes its first steps into R&D
June 2022
What impact is technology having on efforts to improve HS classification efficiency and accuracy?
February 2022
Expansion of rail freight transportation must go hand in hand with deployment of rail scanner systems
February 2022
Blockchain document transfer: understanding the technology and its uses
February 2022
Improving Strategic Trade Detection and Classification through Machine Learning
February 2021
WCO Cargo Targeting system gets upgraded
October 2020
The invisible and secure border of the future
June 2020
How Machine Learning Can Automate the Determination of the Valuation of Goods
February 2020
Key points from the WCO’s newly-launched technology event
October 2019
Perspective on risk management systems for Customs administrations
October 2019
Countries in East Africa cut transit time
February 2019
Standardizing platforms and adapting to the latest technological solutions available is the way forward
February 2019
Blockchain: mapping new trade routes to trust
October 2018
TradeLens uses blockchain to help Customs authorities facilitate trade and increase compliance
October 2018
Emerging technologies can transform border management, but agencies must prepare
February 2017
Paper on the use of container status messages wins ‘best paper’ award
February 2016
Automated detection: Dutch Customs shares its experience
October 2022
Effective enforcement of international trade regulations requires powerful data analytics
February 2023
Key points from the 2022 WCO IT Conference and Exhibition
February 2023
A brief look at what is in the Dossier
October 2022
Handling obsolete NII equipment
October 2021
The invisible and secure border of the future
June 2020
Potential uses of geodata for border management
June 2019
PROFILE: Enhancing Customs Risk Management
June 2019
The PEN-CP project boosts innovation and connects people knowledgeable in Customs and border security
February 2019
TradeLens uses blockchain to help Customs authorities facilitate trade and increase compliance
October 2018
Round-up of the WCO Technology & Innovation Forum
February 2016
Paper on the use of container status messages wins ‘best paper’ award
February 2016
Digital transformation: Swiss Customs presents its mid-term review
October 2022
Effective enforcement of international trade regulations requires powerful data analytics
February 2023
Digitization of ATA Carnets: overview of the ICC pilot project
February 2021
PROFILE: Enhancing Customs Risk Management
June 2019
French Customs puts data science to work for all its officials
June 2022
Effective enforcement of international trade regulations requires powerful data analytics
February 2023
Expansion of rail freight transportation must go hand in hand with deployment of rail scanner systems
February 2022
Digitization of ATA Carnets: overview of the ICC pilot project
February 2021
Controlling general aviation: WCO mapping tool nearing completion
June 2020
Digitization of ATA Carnets: how the Blockchain could enhance trust
October 2018
Emerging technologies can transform border management, but agencies must prepare
February 2017
Bahamas Customs takes huge leap forward on recouping lost and evaded revenue
October 2022
A brief look at what is in the Dossier
October 2022
Brazil’s new integrated risk management solutions
June 2018
The WCO Data Model: guidance for efficient implementation
October 2022
CADENA, a blockchain enabled solution for the implementation of Mutual Recognition Arrangements/Agreements
October 2018
Saudi Arabia engages cross-border trade boosters
October 2019
TradeLens uses blockchain to help Customs authorities facilitate trade and increase compliance
October 2018
Egypt adopts innovative trade document exchange system
October 2022
A brief look at what is in the Dossier
October 2022
Peru Customs reduces the time required to release goods
February 2020
Improving data sharing with blockchain
February 2021
Blockchain: unveiling its potential for Customs and trade
October 2018
CADENA, a blockchain enabled solution for the implementation of Mutual Recognition Arrangements/Agreements
October 2018
TradeLens uses blockchain to help Customs authorities facilitate trade and increase compliance
October 2018
Armenia Customs strengthen anti-counterfeiting enforcement thanks to high-performance analytical tools
February 2023
Finland develops user-friendly duty calculator
June 2019
A brief look at what is in the Dossier
October 2022
Customer service: the next wave
October 2022
The invisible and secure border of the future
June 2020
Emerging technologies can transform border management, but agencies must prepare
February 2017
The United Kingdom’s journey towards a modern declaration management service
February 2016
What impact is technology having on efforts to improve HS classification efficiency and accuracy?
February 2022
Expansion of rail freight transportation must go hand in hand with deployment of rail scanner systems
February 2022
PROFILE: Enhancing Customs Risk Management
June 2019
The PEN-CP project boosts innovation and connects people knowledgeable in Customs and border security
February 2019
Emerging technologies can transform border management, but agencies must prepare
February 2017
Single Window and Service Level Agreements facilitate cross border trade in Oman
February 2021
Going beyond the national Single Window
October 2018
The WCO Data Model: guidance for efficient implementation
October 2022
KCS takes its first steps into R&D
June 2022
What impact is technology having on efforts to improve HS classification efficiency and accuracy?
February 2022
Expansion of rail freight transportation must go hand in hand with deployment of rail scanner systems
February 2022
Blockchain document transfer: understanding the technology and its uses
February 2022
The challenges of X-ray image analysis and the value of training
October 2021
Improving Strategic Trade Detection and Classification through Machine Learning
February 2021
TradeTrust: accelerating the digitalization of international trade
February 2021
Maqta Gateway: Digitizing and transforming trade
October 2020
BACUDA: supporting Customs with data analytics
February 2020
How Machine Learning Can Automate the Determination of the Valuation of Goods
February 2020
Improving facilitation through the use of electronic seals
June 2019
Potential uses of geodata for border management
June 2019
Blockchain: unveiling its potential for Customs and trade
October 2018
Blockchain: mapping new trade routes to trust
October 2018
Digitization of ATA Carnets: how the Blockchain could enhance trust
October 2018
Automatic detection tools: from concept to reality
June 2016
Round-up of the WCO Technology & Innovation Forum
February 2016
Abu Dhabi launches application for real-time measurement of the time required to release goods
February 2023
Moving from risk management to decision intelligence: what it means and where to start
February 2023
Open Architecture: what it means and how to make it work
February 2023
Key points from the 2022 WCO IT Conference and Exhibition
February 2023
The WCO Data Model: guidance for efficient implementation
October 2022
The AI revolution is underway, and this is good news for Customs
October 2022
The Future of Trade Lies in Artificial Intelligence
October 2022
Protecting importers’ information while improving Customs controls
June 2022
Open Architecture: what it means and how to make it work
February 2023
Automatic detection tools help with identifying the illicit trade in ivory
June 2022
Improving Strategic Trade Detection and Classification through Machine Learning
February 2021
Key points from the WCO’s newly-launched technology event
October 2019
Improving facilitation through the use of electronic seals
June 2019
eTIR, the new digital TIR carnet
February 2016
A brief look at what is in the Dossier
October 2022
Customer service: the next wave
October 2022
Communications and collaboration tools: understanding the risks and opportunities
February 2021
Controlling general aviation: WCO mapping tool nearing completion
June 2020
Potential uses of geodata for border management
June 2019
PROFILE: Enhancing Customs Risk Management
June 2019
ONE Record: the next milestone in the digitalization of air cargo data
February 2019
The PEN-CP project boosts innovation and connects people knowledgeable in Customs and border security
February 2019
Blockchain: mapping new trade routes to trust
October 2018
Digitization of ATA Carnets: how the Blockchain could enhance trust
October 2018
TradeLens uses blockchain to help Customs authorities facilitate trade and increase compliance
October 2018
Round-up of the WCO Technology & Innovation Forum
February 2016
Key points from the 2022 WCO IT Conference and Exhibition
February 2023
Protecting importers’ information while improving Customs controls
June 2022
Potential uses of geodata for border management
June 2019
CADENA, a blockchain enabled solution for the implementation of Mutual Recognition Arrangements/Agreements
October 2018
Going beyond the national Single Window
October 2018
Digitization of ATA Carnets: overview of the ICC pilot project
February 2021
Potential uses of geodata for border management
June 2019
PROFILE: Enhancing Customs Risk Management
June 2019
The PEN-CP project boosts innovation and connects people knowledgeable in Customs and border security
February 2019
Improving data sharing with blockchain
February 2021
Blockchain: unveiling its potential for Customs and trade
October 2018
CADENA, a blockchain enabled solution for the implementation of Mutual Recognition Arrangements/Agreements
October 2018
How digital tools can improve compliance with SPS measures
February 2021
TradeTrust: accelerating the digitalization of international trade
February 2021
Perspective on risk management systems for Customs administrations
October 2019
TradeLens uses blockchain to help Customs authorities facilitate trade and increase compliance
October 2018
Round-up of the 2017 WCO Technology & Innovation Forum
February 2018
Emerging technologies can transform border management, but agencies must prepare
February 2017
Standardizing platforms and adapting to the latest technological solutions available is the way forward
February 2019
Blockchain: unveiling its potential for Customs and trade
October 2018
Blockchain: mapping new trade routes to trust
October 2018
Going beyond the national Single Window
October 2018
WCO Cargo Targeting system gets upgraded
October 2020
Building partnerships with other border regulatory agencies through ICT
June 2019
The WCO Data Model: guidance for efficient implementation
October 2022
Improving data sharing with blockchain
February 2021
Blockchain: unveiling its potential for Customs and trade
October 2018
CADENA, a blockchain enabled solution for the implementation of Mutual Recognition Arrangements/Agreements
October 2018
How digital tools can improve compliance with SPS measures
February 2021
WCO Cargo Targeting system gets upgraded
October 2020
Round-up of the 2017 WCO Technology & Innovation Forum
February 2018
Emerging technologies can transform border management, but agencies must prepare
February 2017
Effective enforcement of international trade regulations requires powerful data analytics
February 2023
What impact is technology having on efforts to improve HS classification efficiency and accuracy?
February 2022
Expansion of rail freight transportation must go hand in hand with deployment of rail scanner systems
February 2022
Securing the health of Customs officers
February 2018
Emerging technologies can transform border management, but agencies must prepare
February 2017
Effective enforcement of international trade regulations requires powerful data analytics
February 2023
PROFILE: Enhancing Customs Risk Management
June 2019
The PEN-CP project boosts innovation and connects people knowledgeable in Customs and border security
February 2019
Emerging technologies can transform border management, but agencies must prepare
February 2017
Improving data sharing with blockchain
February 2021
Controlling general aviation: WCO mapping tool nearing completion
June 2020
How Machine Learning Can Automate the Determination of the Valuation of Goods
February 2020
CADENA, a blockchain enabled solution for the implementation of Mutual Recognition Arrangements/Agreements
October 2018
What impact is technology having on efforts to improve HS classification efficiency and accuracy?
February 2022
The invisible and secure border of the future
June 2020
Perspective on risk management systems for Customs administrations
October 2019
Blockchain: mapping new trade routes to trust
October 2018
eTIR, the new digital TIR carnet
February 2016
Paper on the use of container status messages wins ‘best paper’ award
February 2016
The Future of Trade Lies in Artificial Intelligence
October 2022
Improving facilitation through the use of electronic seals
June 2019
Key points from the WCO’s newly-launched technology event
October 2019
Countries in East Africa cut transit time
February 2019
TradeLens uses blockchain to help Customs authorities facilitate trade and increase compliance
October 2018
Key points from the 2022 WCO IT Conference and Exhibition
February 2023
CADENA, a blockchain enabled solution for the implementation of Mutual Recognition Arrangements/Agreements
October 2018
Improving data sharing with blockchain
February 2021
CADENA, a blockchain enabled solution for the implementation of Mutual Recognition Arrangements/Agreements
October 2018
Key points from the WCO’s newly-launched technology event
October 2019
PROFILE: Enhancing Customs Risk Management
June 2019
The PEN-CP project boosts innovation and connects people knowledgeable in Customs and border security
February 2019
Key points from the WCO’s newly-launched technology event
October 2019
Countries in East Africa cut transit time
February 2019
The WCO Data Model: guidance for efficient implementation
October 2022
CADENA, a blockchain enabled solution for the implementation of Mutual Recognition Arrangements/Agreements
October 2018
The WCO Data Model: guidance for efficient implementation
October 2022
CADENA, a blockchain enabled solution for the implementation of Mutual Recognition Arrangements/Agreements
October 2018
PROFILE: Enhancing Customs Risk Management
June 2019
The PEN-CP project boosts innovation and connects people knowledgeable in Customs and border security
February 2019
The WCO Data Model: guidance for efficient implementation
October 2022
CADENA, a blockchain enabled solution for the implementation of Mutual Recognition Arrangements/Agreements
October 2018
The AI revolution is underway, and this is good news for Customs
October 2022
Smart and seamless Customs control to serve and protect global travel
October 2020
Improving data sharing with blockchain
February 2021
CADENA, a blockchain enabled solution for the implementation of Mutual Recognition Arrangements/Agreements
October 2018
How Machine Learning Can Automate the Determination of the Valuation of Goods
February 2020
Key points from the WCO’s newly-launched technology event
October 2019
Countries in East Africa cut transit time
February 2019
Round-up of the 2017 WCO Technology & Innovation Forum
February 2018
The PEN-CP project boosts innovation and connects people knowledgeable in Customs and border security
February 2019
The PEN-CP project boosts innovation and connects people knowledgeable in Customs and border security
February 2019
The PEN-CP project boosts innovation and connects people knowledgeable in Customs and border security
February 2019
CADENA, a blockchain enabled solution for the implementation of Mutual Recognition Arrangements/Agreements
October 2018
Effective enforcement of international trade regulations requires powerful data analytics
February 2023
What impact is technology having on efforts to improve HS classification efficiency and accuracy?
February 2022
The PEN-CP project boosts innovation and connects people knowledgeable in Customs and border security
February 2019
The PEN-CP project boosts innovation and connects people knowledgeable in Customs and border security
February 2019
The PEN-CP project boosts innovation and connects people knowledgeable in Customs and border security
February 2019
The PEN-CP project boosts innovation and connects people knowledgeable in Customs and border security
February 2019
CADENA, a blockchain enabled solution for the implementation of Mutual Recognition Arrangements/Agreements
October 2018
CADENA, a blockchain enabled solution for the implementation of Mutual Recognition Arrangements/Agreements
October 2018
CADENA, a blockchain enabled solution for the implementation of Mutual Recognition Arrangements/Agreements
October 2018